Tired of your coil cable falsing on your detector? This wire stabilizer will cure false signals created by bumping and flexing of the shaft once and for all on your Minelab SD, GP, or GPX Gold detector. Made right here in the USA by a fellow nugget hunter and good friend of mine Mike Krisher.
INSTALLING YOUR NEW ULTIMATE STABILIZER ON YOUR DETECTOR
Step 1. Unplug coil cable, smart point plug and remove the 2 top screws on the control box.
Step 3. Plug smart point plug into port, connect coil cable and install clip on cable with the white bushing flange facing out. Screw the thumb screw through the bushing and snug it up. the clip should be pushing in on the strain relief and you are ready to go hunting...